About Me

All You Need To Know About Appliance Services

Hello, my name is Kenneth Davis and I'm excited that you've found my appliance services blog. In this blog, you'll learn about buying new appliances, common appliance repairs and new appliance trends. I know a lot about appliances and it all started when I was young and the appliance man came to our house to fix the stove. I watched the appliance man as he did his job and when he was done, our stove worked like new. The appliance man made a big impact on me and after that, I read and learned everything I could about appliances. Today, I still enjoy keeping up with the current designs and features that are available when buying new appliances. I hope that you find my appliance blog fascinating and that it helps you when buying an appliance or requesting an appliance service.



Latest Posts

All You Need To Know About Appliance Services

Finding The Cause Of Leaking From Under Your Washing Machine

by Johnny Jennings

If you noticed a puddle of water seeping out from underneath your washing machine after you run it, you are likely to be concerned about additional problems and potential damage to your floor. Finding the source of the leak will be necessary so your washing machine can continue to be used without further incidents. Here are some of the locations you can check to make a repair on your own if leaking is present. 

Look At The Water Pump Area For Wear

Your washing machine has a water pump in the base of the front or back of your unit which is responsible for removing water from the basin after your clothing is laundered. If this pump fails, water will remain in the basin. If there is a crack present in the outlet hose attached to this pump, water will dribble out from the bottom of your washing machine. After a cycle is complete, turn off the electrical supply to your unit and remove the front or back panel where the main components are located. Visually inspect the water pump for wear. If it is discolored, cracked, or melted, a new pump will be necessary. If the hose connected to the pump is frayed or cracked, it should be removed and replaced.

Look To The Tub Cover Gasket For Problems

The tub cover gasket provides a protective barrier from water getting out of your machine. This is positioned around the outer tub portion of your basin area and is sealed when your washing machine's door or cover is closed. If this gasket is worn, the seal will not be present, allowing water to leak out of the area if the water level rises due to an extra-large load of laundry. Take a look at the gasket for discoloration and rough edges. If the gasket does not feel cushioned when you press upon it or if you see small rips present within its structure, it will need to be removed,  and you can glue a new gasket piece in its place.

Check The Hoses Behind Your Machine

The hoses leading from the back of your washing machine unit will bring in and remove water to and from your unit. If one of these hoses does not have a tight seal, water will be likely to drip onto the floor, possibly showing up in front of your machine. Inspect these hoses to ensure there are no cracks present where water is escaping. If you notice one, a new hose should be put in place by a washing machine repair specialist. Plumber's tape can be placed around the hose temporarily to see if water stops leaking and so you can do a few loads of laundry before your service call.

For help with any of your washing machine repair needs, contact a company like Affordable Appliance Repair​.